RB8513 -- Timebase
Purpose
Generate short pulses with a programmable interval time.
Description
Module RB8513 is a clock signal generator with a programmable interval time. It has a TTL trigger input and a TTL clock output.
The module can generate a clock signal with the following interval times.
50 ns, 100 ns, 200 ns, 500 ns, 1-99 us, step 1 us, 0.1-9.9 ms, step 100 us, 10-990 ms, step 10 ms.
Configuration
The RB8513 timebase module has no properties that are configured at production time.
Default configuration
rb8513_timebase "name" { address = 0xB0 }
When the Rulbus configuration file is read, the timebase interval time is set to 1 us.
Modules | |
| RB8513 TIMEBASE Close | |
| close a timebase. | |
| RB8513 TIMEBASE Get Interval Time | |
| get the current interval time in s. | |
| RB8513 TIMEBASE Open | |
| open a timebase. | |
| RB8513 TIMEBASE Set Interval Time | |
| set set interval time to 50 ns, 100 ns, 200 ns, 500 ns, 1..99 us, 0.1..9.9 ms, 10..990 ms. | |
| RB8513 TIMEBASE Stop | |
| stop the generation of pulses. | |
| RB8513 TIMEBASE TEST | |
| test the timebase VIs and physical timebase module. | |